New! Alcomate™ AL7000 Premium Professional Breathalyzer

DOT/NTHSA Approved
Meets US Coast Guard Requirements
CE Mark, NF Mark
ISO Certified
Test Count &
Re-calibration Notification
Flow Pressure Sensor
Pressure Sensing/Error Detection

*MEMS is the abbreviation for Microelectro-Mechanical Systems, a technology developed at the University of California at Berkley that employs miniscule silicon sensors or "motes" a.k.a "Smart Dust". Smart Dust, as the name implies, is the equivalent of coating a receptor microchip with micro fine powder consisting of millions of individual smart sensor motes. The use of MEMS, or smart dust, exponentially increases the sensitivity and detection effectiveness of the receptor microchip in identifying and quantifying targeted molecules (hydrocarbons in the case of alcohol breath analyzers). This increased sensitivity and accuracy however can be more readily compromised by cigarette smoke or other contaminates in the air. Therefore it is extremely important that MEMS devices be used as free from ambient smoke as possible. See Technology and Accuracy.

Highly Accurate 0.000% Display To nearest .001 (1/1000) BAC% Backlit LCD

• DOT Approved. Accuracy Certified to DOT, NHTSA Standards.
• User replaceable re-calibration sensor module.
• Sensor Accuracy: +/- 0.010% at 0.100% BAC
• 0.000% to 0.400% Blood Alcohol Equivalent in 0.001% increments.
• Advanced Semiconductor Microchip Oxide Sensor.
• Automatic Sample Volume Flow Sensor with Error Prompt
• Large 4 digit backlit LED Numeric Display.
• Power on Self Test, self Calibration, Audible and Visual Ready Prompt.
• Displays Test results in 2-3 Seconds.
• Active Pressure Sensor, Deep-lung sampling
• Built in 32 bit A/D Converter Microchip.
• Standby Mode and Auto Power Off.
• Low Battery Alarm and Visual Indicator.
• Power Supply: Two AA 1.5V batteries (included).
• About 225 Test Cycles Between Battery Change (3 hours continuous).
• Weight 1.8 ounces (without batteries).
• Dimensions: 4.2 X 2.0 X 0.75 inches
• Recommended use: Personal, field law enforcement, institutional
• 1 year Manufacturers Warranty

TESTING PROTOCOL

Important. Wait at least 10 minutes after consuming alcohol or smoking before testing. This period is necessary for all the alcohol molecules to be absorbed into the system preventing a high false positive reading. Also, components of tobacco smoke can effect the accuracy of BAC readings by interfering with the sensor microchip. It is also recommended to perform the test in a smoke free environment. See Technology and Accuracy.

1. Depress the power button to activate the test unit. The unit is powered by two AA alkaline 1.5V batteries (included).
2. Place one of the five mouthpieces (included) into the breath sample intake port.
3. The Alcomate AL7000 Premium will automatically begin a self test and sensor calibration routine. The digital display will commence a numeric countdown sequence indicating that purge cycles and circuit tests are taking place. A RDY (ready) indicator on the display and 0 in the display result panel indicate the unit is ready for breath sampling.
4. Take a deep breath and blow steadily and continuously for 2-3 seconds into the mouthpiece or until two short beeps are heard. Note: Intermittent blowing or blowing too long or too short will result in an "Flu" or error message on the display. Press the "Power" button to restart the test routine from the beginning.
5. After 2-3 seconds, the test result in percentage BAC will be displayed indicating completion of the test.
6. The AL7000 Premium will then power off automatically after 10 seconds.

Using the Alcomate AL7000 Premium is an professional and accurate way to avoid the many risks associated with alcohol consumption. These risks are well publicized and can lead to life threatening consequences not only for intoxicated individual but also for other persons potentially affected by the condition. Used as a monitor, the Alcomate AL6000P Digital can indicate when equivalent blood alcohol percentages are below or above state legal limits preventing potential arrest or worse, reckless endangerment of others.  This professional breath analyzer is recommended for "on the spot" testing whenever alcohol consumption is planned or intoxication is suspected. With the exception of replacement of the batteries, the Alcomate AL7000 Premium should provide accurate readings indefinitely as long as the sensor is not damaged. Test protocol and use instructions must be followed for accurate results. For additional information on technology method and specificity expectation see Technology and Accuracy.

Deluxe Field Case