Alcomate™ AL6000P Prestige Professional Breathalyzer Newest Technology, User Replaceable Calibration Module, Highest Accuracy, Commercial Grade, Digital Alcohol Detector Professional model from Sentech Technologies. quantitative conversion of breath alcohol content to equivalent blood alcohol (BAC) percentage within seconds. Results displayed on a large LED panel. Self-diagnostic menu alerts/prompts on display. User  Replaceable Sensor module allows onsite re-calibration when required. Reusable one way flow mouthpieces. U.S. Department of Transportation (DOT) and NTHSA approved. Reliable, precision accuracy. Automatic sample volume sensor with visual and audio error messaging. Auto power shut off. Completely portable unit. Suggested for personal, institutional and law enforcement field use. Supplied with extra mouthpieces and soft carry case.

Now Features... •  User Replaceable Sensor Module •  Instant Onsite Re-Calibration •  No need for outside Re-Calibration Services

PRINCIPLE

The Alcomate AL6000P Prestige Professional alcohol breath analyzer is the latest high technology U.S. DOT and NTHSA approved alcohol detection instrument employing the newest Sentech semi-conductive microchip oxide sensor to determine equivalent blood alcohol content within a range of 0.00% to 0.40% in increments of .01% from a measured breath sample with a sensor accuracy rate of +/- 0.01% at 0.10% BAC. Results are displayed digitally within a few seconds. Fast, easy, and convenient to use, this professional portable model is recommended for both personal and law enforcement field use when high performance and accuracy of results is indicated. The AL6000P Prestige Professional incorporates the newest oxide gas sensor from Sentech, one of the largest manufacturers of microchip sensors worldwide. The AL6000P model includes 5 specially designed non-disposable one-way mouthpieces that prevent subject manipulation of breath sampling by "blow back" and insuring proper breath sampling. Easy to replace sensor module eliminates the inconvenience, added costs and service interruption of outside re-calibration services. Simply install a new sensor module after the recommended 6-8 month use (dependent on light to heavy use) or when unit consistently displays suspect or unexpected results. Replacement sensor modules sold separately. As with all electronic measuring devices, accurate results are significantly impacted by failure to follow proper testing protocol and use instructions included with the unit. Specifications and features of the AlcoScan AL6000P Prestige Digital Pro model follows:

*MEMS is the abbreviation for Microelectro-Mechanical Systems, a technology developed at the University of California at Berkley that employs miniscule silicon sensors or "motes" a.k.a "Smart Dust". Smart Dust, as the name implies, is the equivalent of coating a receptor microchip with micro fine powder consisting of millions of individual smart sensor motes. The use of MEMS, or smart dust, exponentially increases the sensitivity and detection effectiveness of the receptor microchip in identifying and quantifying targeted molecules (hydrocarbons in the case of alcohol breath analyzers). This increased sensitivity and accuracy however can be more readily compromised by cigarette smoke or other contaminates in the air. Therefore it is extremely important that MEMS devices be used as free from ambient smoke as possible. See Technology and Accuracy.

TESTING PROTOCOL

Important. Wait at least 10 minutes after consuming alcohol or smoking before testing. This period is necessary for all the alcohol molecules to be absorbed into the system preventing a high false positive reading. Also, components of tobacco smoke can effect the accuracy of BAC readings by interfering with the sensor microchip. It is also recommended to perform the test in a smoke free environment. See Technology and Accuracy.

1. Depress the power button to activate the test unit. The unit is powered by two AA alkaline 1.5V batteries (included).
2. Place one of the five mouthpieces (included) into the breath sample intake port.
3. The Alcomate AL6000P Prestige will automatically begin a self test and sensor calibration routine. The digital display will commence a numeric countdown sequence indicating that purge cycles and circuit tests are taking place. A RDY (ready) indicator on the display and 0 in the display result panel indicate the unit is ready for breath sampling.
4. Take a deep breath and blow steadily and continuously for 2-3 seconds into the mouthpiece or until two short beeps are heard. Note: Intermittent blowing or blowing too long or too short will result in an "Flu" or error message on the display. Press the "Power" button to restart the test routine from the beginning.
5. After 5-8 seconds, the test result in percentage BAC will be displayed indicating completion of the test.
6. The AL6000P Prestige will then power off automatically after 10 seconds.

Using the Alcomate AL6000P Prestige is an professional and accurate way to avoid the many risks associated with alcohol consumption. These risks are well publicized and can lead to life threatening consequences not only for intoxicated individual but also for other persons potentially affected by the condition. Used as a monitor, the Alcomate AL6000P Digital can indicate when equivalent blood alcohol percentages are below or above state legal limits preventing potential arrest or worse, reckless endangerment of others.  This professional breath analyzer is recommended for "on the spot" testing whenever alcohol consumption is planned or intoxication is suspected. With the exception of replacement of the batteries, the Alcomate AL6000P Prestige should provide accurate readings indefinitely as long as the sensor is not damaged. Test protocol and use instructions must be followed for accurate results. For additional information on technology method and specificity expectation see Technology and Accuracy.

Deluxe Field Case

USER RE-CALIBRATION MODULE

The AL6000P Prestige features a user replaceable re-calibration sensor module. Easy to replace sensor module eliminates the inconvenience, added costs and service interruption of outside recalibration services. Simply install a new sensor module after the recommended 6-8 month use (dependent on light to heavy use) or when unit consistently displays suspect or unexpected results. Replacement sensor modules sold separately. See the Instructions for sensor replacement.

AVAILABILITY

Each Alcomate AL6000P Prestige Professional Digital Breath Analyzer comes boxed with five (5) reusable, non-disposable one-way mouthpieces, zippered deluxe field case, carry strap, two AA 1.5 volt batteries and complete operating instructions. For sanitary reasons, it is recommended that each mouthpiece be used only by the same person or be washed in hot water or sterilized between uses. Note: The special mouthpiece must be used for each test or damage could occur to the sensor microchip. Mouthpieces are constructed of high grade ABS plastic and will last indefinitely. Re-calibration sensors are available separately. Sensor modules come with complete installation instructions.

Description	Packaging	Sale Unit	Cost	Order
Alcomate AL6000P Prestige Digital Pro Breath Analyzer	Boxed	One (1) Unit	$129.00
		Three (3) Units	$360.00
		Six (6) Units	$630.00
		Twelve (12) Units	$1,140.00
		Twenty Four (24) Units	$1,920.00
Alcomate AL6000P Prestige GREEN Calibration Sensor Module Only*	Boxed	One (1) Unit	DISC
Alcomate AL6000P Prestige RED Calibration Sensor Module Only*	Boxed	One (1) Unit	$25.00
Alcomate AL6000P Prestige One Way Mouthpieces Only	Poly	100 Each Pack	$39.00
		1000 Each Pack	$350.00

*IMPORTANT NOTE: If you purchased your AL6000 Prestige before October 2007, please select the GREEN sensor when replacing. If you purchased your AL6000 Prestige after December 2007, please select the RED sensor when replacing. If you purchased your AL6000 Prestige between October - December 2007, you must verify whether you have a RED or GREEN sensor module. This can be done by examining the sensor module's circuit board color through the rear air vent on top of the device.
* Note: This sensor will only fit the new AL6000P Prestige model. It will not fit older models of the AL6000 breathalyzer.  The breathalyzer unit must be marked Alcomate "PRESTIGE" Model.

For bulk purchases of Fifty (50) units or more please contact us by e-mail Customer Service

See the Instructions for sensor replacement